Best Crossbow Quiver 2026: 7 Quivers Compared for Crossbow Bolts

Disclosure: This article contains affiliate links. If you buy through them, I may earn a commission at no extra cost to you. It keeps the lights on and the testing going. Read my full affiliate disclosure.

The Short Answer

If you are hunting with a crossbow, get a quiver built for crossbow bolts and a mount that detaches fast. My top pick is the TightSpot quiver with TightSpot’s universal crossbow bracket: it rides tight, holds bolts with zero rattle, and comes off one-handed in the stand. If you would rather keep it simple, the quiver that came with your bow is already built for your bolts and is usually the smartest buy. Most bow-quiver roundups online cover compound quivers, which do not fit crossbow bolts. That is the first thing this guide fixes.

Why Most “Bow Quivers” Do Not Fit Crossbows

My first season, I searched for a quiver and every top result covered compound bow quivers. I nearly ordered one, then measured my bolts. A compound arrow runs 28 to 32 inches long. A crossbow bolt runs 16.5 to 22 inches and carries a much heavier head. A compound quiver is built for long, skinny arrows with light tips, so a short, front-heavy bolt sits wrong: the hood is too deep, the gripper spacing is off, and the heavy broadhead rattles against the hood insert. That rattle matters. A rattling quiver blows a stalk before you ever see a deer.

Crossbow quivers are built around the bolt: the hood depth fits a bolt-length shaft, the gripper spacing matches 16 to 22 inch bolts, and the mount fits a crossbow stock. If you shoot a crossbow, buy a crossbow quiver; the compound stuff belongs on a compound bow. My crossbow bolts guide covers which bolts pair best with these quivers, because the wrong bolt makes even a good quiver noisy.

Quiver	Capacity	Mount Type	Hood	Weight	Best For
TightSpot (with universal crossbow bracket)	3 bolts	Universal crossbow bracket, Picatinny fit	Acoustic-dampening insert, vented	6.86 oz	Hunters who want the quietest, tightest setup
Excalibur 4-Arrow Quiver	4 bolts	Quick-twist locking screw	Camo hood, fits fixed or mechanical heads	Not published	Excalibur owners who want 4 bolts on the bow
TenPoint 3-Arrow Instant Detach	3 bolts	Quick-disconnect lever, under or side mount	Not published	4.75 oz	Lightest stock quiver, treestand hunters
Ravin Quiver	3 bolts	Removable bottom mount with bracket	Not published	Not published	Ravin owners, keep the factory setup
Barnett Hyperflite Quiver	3 bolts plus 1 de-cocking slot	Side mount, quick detach	Not published	Not published	Barnett shooters, extra de-cocking arrow slot
Killer Instinct Quick-Detach Quiver	3 or 5 bolts depending on package	Quick detach	Not published	Not published	Killer Instinct owners, bundled convenience
CenterPoint Quick-Detach Quiver	3 bolts	Parallel mount with locking lever	Not published	Not published	CenterPoint owners on a budget

Best Overall: TightSpot Quiver with Universal Crossbow Bracket

Capacity: 5 arrows  |  Price: ~$130  |  Mount Type: Universal bracket

I put this one first because it is the quietest quiver I have run, and silence is the whole game. The QuickLock cam pulls the quiver off with one hand in the stand, and the acoustic-dampening hood insert keeps broadheads silent on the walk. The carbon rods ride tight to the frame, which matters on a narrow bow where every ounce off to the side shows up in your hold.

The catch is that you are buying a system, not a box. You need the 3-arrow quiver and the universal crossbow bracket, which adds cost, and 3 bolts is on the lean side. I consider that a fair trade. I would rather carry 3 bolts quietly than 5 bolts that rattle. This is my pick for spot-and-stalk, where the quiver stays on the bow and noise is unforgiving.

Check Price on Amazon

Best Excalibur: Excalibur 4-Arrow Quiver

Capacity: 4 arrows  |  Price: ~$27  |  Mount Type: Side mount

If you shoot an Excalibur, this is the quiver I would buy. It was designed around their own bows and 16.5 inch bolts, so the gripper spacing and hood depth are exactly right. The clips hold bolts tipped with fixed-blade or mechanical broadheads, the detail most stock quivers get wrong. A quick twist of the locking screw removes it, so in a treestand you can hang it and shoot bare. Read my Excalibur crossbow reviews if you are still picking the bow.

Four bolts is a genuine advantage on a recurve-style bow where follow-up shots can happen fast. Excalibur also sells this as a standalone part for around $27, so replacing a worn one is easy. The honest gaps: Excalibur does not publish a weight, and the mount is Excalibur-specific, so this is not a quiver you move to another brand.

Check Price on Amazon

Best TenPoint: TenPoint 3-Arrow Instant Detach Quiver

Capacity: 3 arrows  |  Price: ~$45  |  Mount Type: Instant detach

A quiver should disappear on the bow until you need it, and at 4.75 ounces this one comes closer to that ideal than anything else I have tested. Flip the lever and it is off in one motion, no twisting, no second-guessing with cold hands. I run mine under the stock on the walk in, then hang it on a hook in the treestand using the flexible rubber loop in the cup, which is silent where a metal clip would ping against the stand.

Mounting flexibility is the other win here. Under-mount keeps the profile tight, and the optional ambidextrous side bracket gives left-handed shooters a proper setup instead of an afterthought. Three bolts is plenty for a day of hunting, and because the quiver is so light, pulling it before the shot barely changes the bow’s balance, which is exactly what you want when you have been holding at full draw waiting on a deer.

The honest gap is the spec sheet. TenPoint does not publish hood dimensions or broadhead clearance, so if you shoot big fixed-blade heads, fit them in the quiver at home before opening day, not in the dark on the first morning. Mechanicals and standard fixed blades have given me zero trouble, but a wide-cut head deserves a test fit.

Bottom line: If you hunt with a TenPoint or Wicked Ridge, this is the quiver to beat: the lightest, the fastest off the bow, and the quietest to hang in a stand. Just verify your broadhead fit in preseason.

Check Price on Amazon

Best Ravin: Ravin Quiver

Capacity: 6 arrows  |  Price: ~$65  |  Mount Type: Side mount

Every Ravin ships with this quiver in the box, and it is a stock quiver done right. It mounts to the bottom of the bow, which keeps an already-narrow Ravin slim instead of hanging bolts off the side where they catch brush. On my R10 the whole package still threads through thick cover without the quiver becoming a handle that snags everything.

Removal is genuinely quick, so I pull it before the shot and either hang it or set it at my feet. It holds three bolts, which matches the three Ravin puts in the box, and for a day of stand hunting three is all I have ever needed. The mount is solid with no rattle, and after a full season the retention has not loosened, which is more than I can say for some aftermarket quivers.

The plain truth is that Ravin publishes almost nothing about it: no weight, no hood dimensions, no broadhead clearance figures. I ran mechanicals all season with no issues, but if you shoot large fixed-blade heads, check the fit yourself before you trust it. And because it is brand-specific, there is no reason to buy one separately unless you are replacing a lost or broken one.

Bottom line: You already own this quiver if you own a Ravin, and you do not need to replace it. It is light, quiet, and purpose-built for the bow. Just confirm your broadhead fit if you run big fixed blades.

Check Price on Amazon

Best Barnett: Barnett Hyperflite Quiver

Capacity: 3 arrows  |  Price: ~$30  |  Mount Type: Side mount QD

Barnett’s Hyperflite Quiver has the smartest trick in this roundup: a dedicated slot for a de-cocking arrow. Anyone who has ended a hunt with a loaded crossbow knows the awkward end-of-day question of what to do with the bolt. The Evac slot keeps the de-cocking arrow on the bow so it is always there. The side mount holds the quiver vertical to the rail for a compact profile and quick access. My Barnett reviews rate the bows this quiver ships with.

It is a premium quick-detach design that fits both small-diameter HyperFlite bolts and standard HeadHunter bolts, which covers the whole Barnett lineup. Like most stock quivers, Barnett does not publish the weight or hood specs, so I will not pretend I know them. If you run a Barnett, this is the quiver that matches your bolts. Pair it with a good crossbow case and your whole kit travels quiet.

Check Price on Amazon

Best Killer Instinct: Killer Instinct Quick-Detach Quiver

Capacity: 3 arrows  |  Price: ~$15  |  Mount Type: Quick-detach

This quiver arrives in the box with your Killer Instinct bow, and it is the only stock quiver here with a 5-bolt version on some packages. The quick-detach mount does exactly what the name promises: on for the walk, off for the shot, one motion either way. If you like carrying a deep bench of bolts, the 5-bolt capacity on packages like the Swat XP is a real differentiator that no other brand offers at this price.

The tradeoff for five is bulk. A loaded 5-bolt quiver hangs wider and heavier than a 3, and on a narrow Killer Instinct frame you will feel it on long walks and notice it in tight blinds. I run the 3-bolt version for stand hunting and only take the 5 when I am doing a full day of spot-and-stalk where resupply is not an option.

My complaint is the same one I have with every stock quiver: Killer Instinct does not publish weight or hood dimensions. Run the one that came with your bow, check your broadhead fit in preseason, and you are set. There is no reason to buy this separately unless yours broke, because it only fits Killer Instinct bows anyway.

Bottom line: Run what came with your Killer Instinct. The 3-bolt is the sweet spot for stands; take the 5 only when you truly need the extra bolts. It is a solid stock quiver that costs you nothing extra.

Check Price on Amazon

Best CenterPoint: CenterPoint Quick-Detach Quiver

Capacity: 3 arrows  |  Price: ~$25  |  Mount Type: Quick-detach

CenterPoint’s parallel quiver is the workingman’s entry in this roundup. It slides on and locks with a lever, simple and secure, and on bows like the CP400 the mount is ambidextrous, which left-handed shooters will appreciate. It comes in the box with bows like the Sniper Elite 385 and Dagger 405, and it does the one job a quiver has to do: hold three 20 inch bolts securely through brush, climbs, and bumpy truck rides.

I will not dress it up as something it is not. This is a basic stock quiver with basic stock-quiver manners. The hood is snug, which is good for retention but means large broadheads deserve a test fit before opening day. CenterPoint does not publish weight or hood specs, so what you see is what you get, and what you get is perfectly serviceable.

Where it wins is the math of the whole package. If you bought a CenterPoint for performance per dollar, the included quiver keeps that deal intact instead of forcing a $40 to $60 aftermarket purchase. Detach it before the shot, hang it or set it down, and it has done its job.

Bottom line: A perfectly good stock quiver that keeps your CenterPoint package a deal. Test your broadhead fit in preseason, detach before the shot, and spend the money you saved on bolts and broadheads instead.

Check Price on Amazon

Quick-Detach vs Fixed: Which Mount?

This comes down to where you hunt. A quick-detach mount pulls the quiver off in a second or two. In a treestand, hang the quiver on a hook and the bow gets lighter, slimmer, and quieter for the shot. On a spot-and-stalk, the quiver usually stays on, because you may not get a chance to reattach it. I would not buy a fixed quiver for a crossbow; the ability to strip the bow for the shot is too valuable.

One more practical note. Learn your mount cold in the backyard, not in the tree. The safety rules for handling a loaded crossbow change slightly when you are clipping and unclipping accessories, and fumbling with a lever at height is how bolts get dropped.

Broadhead Clearance: What Fits in the Hood?

The hood is the cup that covers your broadheads, and its inside clearance decides which heads you can carry safely. Mechanical heads fold flat and fit almost any hood. Fixed-blade heads are the test: a wide-cut fixed blade needs a deep hood, and a shallow one will refuse to close or press against the blades and dull them. Excalibur is the only maker here that states plainly its quiver fits fixed or mechanical heads. The rest do not publish hood dimensions, so the preseason check is on you: slide your broadheads in at home, and if the hood does not close cleanly, that head and quiver do not belong together.

Two rules I follow. First, never carry broadheads loose or half-seated because the hood “almost” fits. A blade that works its way out will cut you or your gear. Second, match your heads to your quiver before you buy replacements, not after. My broadhead guide lists the head sizes that fit standard quiver hoods.

Balance: How a Loaded Quiver Changes Your Bow

A loaded 3-bolt quiver adds roughly half a pound off one side of the bow, creating torque that rolls the bow toward the quiver side in your hands. You will not notice it at 20 yards on a rest. You will notice it at 50 yards offhand, where that roll opens your groups. This is why tight-to-frame quivers shoot better than bulky ones hanging off the stock: closer to the frame means less leverage, which means less torque.

The treestand answer is to detach the quiver before the shot, which is exactly what quick-detach mounts are for. The stalking answer is to practice with the quiver on, because it will be on when the moment comes. Either way, sight in your bow the way you hunt. If you sight in bare and hunt loaded, your point of impact can shift, and you will blame the bow for a quiver problem. My sighting-in guide walks through the process.

Frequently Asked Questions

Can I use a compound bow quiver on a crossbow?

You can try, but you should not. Compound quivers are spaced for 28 to 32 inch arrows; crossbow bolts run 16.5 to 22 inches with much heavier heads, so they rattle. Otherwise, buy a quiver made for crossbows.

How many bolts should my quiver hold?

Three to four is the standard, and it is plenty. Most hunters never fire more than two bolts at one animal, and a 5-bolt quiver adds bulk off the side of the bow. The only real reason to go bigger is a deep reserve on a long backcountry hunt. For treestand and blind hunting, 3 is my preference.

Will my fixed-blade broadheads fit in a crossbow quiver?

Usually yes, but check before season. Mechanical heads fold flat and fit any hood. Wide-cut fixed blades need a deep hood, and Excalibur is the only maker here that states its quiver fits fixed or mechanical heads. For the rest, manufacturers do not publish hood dimensions, so confirm at home that the hood closes cleanly with no blade contact.

Should I remove my quiver before taking a shot?

In a treestand, yes: hang the quiver on a hook and shoot the bow bare for a lighter, slimmer, quieter shot. On a spot-and-stalk, keep it on, because you likely will not get a chance to reattach it. This is why I recommend quick-detach mounts: they give you the choice every time.

Does a loaded quiver hurt accuracy?

It can. A loaded quiver adds roughly half a pound off one side of the bow, creating torque that rolls the bow in your hands. At close range it barely matters; at 50 yards offhand it can open your groups. The fix is to sight in your bow exactly the way you hunt, quiver on or off.

What is the difference between quick-detach and fixed quiver mounts?

A quick-detach mount pulls the quiver off in seconds with a lever, cam, or twist screw. A fixed mount stays bolted on. Quick-detach is the better hunting system: strip the bow for the treestand shot, keep the quiver on for the stalk. I would not buy a fixed quiver for a crossbow.

How do I stop my quiver from rattling?

Start with a quiver built for your bolt length so the grippers and hood match. Then check the three rattle points: bolts seated fully in the grippers, broadheads not touching the hood insert, and the mount locked tight with no play. Hoods with acoustic-dampening inserts, like the TightSpot’s, silence broadhead contact. Fix it in the backyard before season.

Is the quiver that came with my crossbow good enough?

Almost always, yes. Stock quivers are built for the brand’s own bolt length and mount system, and they cost you nothing extra. Upgrade only for a specific reason: a quieter hood, a lighter setup, one-handed detach, or a universal mount for multiple bows. If the stock quiver holds your bolts tight and your broadheads fit, spend the money on better bolts or broadheads instead.

The Bottom Line

Most quiver roundups online answer the wrong question, because they cover compound quivers that do not fit crossbow bolts. The right crossbow quiver holds 16.5 to 22 inch bolts quietly, detaches in seconds, and matches your broadheads. My top pick is the TightSpot 3-arrow quiver with the universal crossbow bracket. If you would rather not spend the money, the quiver that came in your box is already built for your bolts and is the smart default. Check your broadhead fit before opening day, sight in the way you hunt, and a rattling quiver will never blow a stalk again. My best crossbows guide and best crossbow for the money picks pair these quivers with the right bows.

As an affiliate site, I earn from qualifying purchases made through the links above at no extra cost to you. I only recommend gear I would hunt with myself, and every recommendation here is based on hands-on use and manufacturer spec sheets. See the full affiliate disclosure for details.